Телефон: +7 (937) 519-34-24

Use to connect up to 3 LEDs directly to any available channel on the RX (receiver).

Pins can be soldered to for a hardwired connection. Pins can also be removed if they will not used. Use the 3x2P connector housing to shield unused pins & to combine multiple wire extension housings for a one-plug connection.

Plug RX Direct2LED™ into any available channel on the RX, or use any 3.6-7.4VDC power source.  If no extra channels are available on the RX use a RX Pass-Thru™.

Align BLUE wires with the blue '+' on the RX Direct2LED™, all LED channels are exactly the same. RX Direct2LED Includes

PINOUT LEGEND

RESISTOR RESISTOR IN CIRCUITRY

CONNECTION ELECTRICALLY CONNECTED

+ POSITIVE VOLTAGE FROM POWER SOURCE

- NEGATIVE GROUND FROM POWER SOURCE

R+ POSITIVE OUTPUT WITH INLINE RESISTOR

TOP PINOUT

5075 Top Pinout 

BOTTOM PINOUT

5075 Bottom Pinout 
RX Direct2LED Installed

WIRE COLOR (TO RX)

BLACK - GROUND
RED - POSITIVE 

WIRE COLOR (TO LEDs)

BLACK - GROUND
BLUE - POSITIVE